FCA0.S10 VALVE SERIES
SAE Cartridge - 350 bar
Direct acting - Pressure Compensated
DESCRIPTION
A direct acting, screw-in insert type, 2-way pressure compensated flow control valve. The flow rate of this valve in the 1 to 2 flow
path is largely independent of the system pressure. The valve can be adjusted for variable flow output. Free flow in the 2 to 1 path
is allowed and not pressure compensated.
Cavity
HYDRAULIC SYMBOL
Cross section
SAE10
TECHNICAL DATA
EXTERNAL COMPONENT TREATMENT
Zn/Fe - standard (96h)
Zn/Ni (720h) (Upon customer request)
MAXIMUM FLOW
16 l/min
MAXIMUM OPERATING PRESSURE
350 bar (2 to 1 max working pressure 160 bar)
WEIGHT
0,150 kg
SEAL KIT CODE
SK.001 (standard sealing NBR-BUNA-N)
OIL TESTING CONDITIONS
ISO VG 46 cSt
TECH. SPEC. FOR CHARACTERIZATION
see page 689
ORIENTATION
No restrictions
INSTALLATION TORQUE
40-45 Nm
FILTRATION
20/18/15 ISO 4406 (maximum filtration admitted)
VISCOSITIES
7,4 to 420 cSt
FLUIDS
Mineral - based or synthetics with lubricating properties
OIL TEMPERATURE RANGE
-30° C to 110° C
O-RING TEMPERATURE RANGE
-30° C to 110° C (standard sealing NBR - BUNA - N)
-35° C to 140° C (HNBR - Upon customer request)
-23° C to 225° C (FKM - Upon customer request)
Hex.24
TIGHTENING TORQUE NUT
15-20 Nm Hex.17
F C A 0
.
ORDERING CODE
S 1 0 0
*
. .
0 0
*
Valve basic code
Size
0 = Standard factory marking.
Customized marking can be
done upon request.
Marking
S10 = 7/8-14 UNF with Ø15,87
nose size
Flow adjustment
0 = Hex Allen Head
V = Top plastic knob
W = Top plastic knob + plastic counter knob
000 = Standard
configuration.
100 = Fine regulation
FLOW CONTROLS
Specifications may change without notice.
PERFORMANCE DETAILS
The performance chart illustrates flow handling capacity for significant spring bias options.
p/Q curves are recorded at TOil = 40°C and 46 cSt.
NOTE
369 370
